Mechanical Screen - Dometic Interact Manuel D'utilisation

Dometic Interact
– Choose A to set the fan to the Auto setting, where
the unit will determine the appropriate fan speed
automatically based on the set temperature and the
actual temperature readings.

4.1.3 Mechanical Screen

The Mechanical screen allows you to control and monitor
your mechanical appliances, such as awnings and
ventilation fans.
3 Mechanical Screen
From this screen, you can control and monitor the
following functions:
• Power: The default state for the bath and galley fan
Power buttons is off. Tap the Power button once to turn
the fan on.
The lid must be open before the fan motor turns
I
on. If the lid is closed when you attempt to turn the
fan motor on, the lid will open automatically.
• Lid Control: The bath and galley fan lids are closed by
default. Tap the Open or Close button for the galley or
bath fan lid control to open or close the lids. A white
outline around the button indicates the status of the lid.
EN
• Vent Fan Speed: The Fan Speed buttons control the
speed of the galley vent fans. Tap a button to choose
the desired vent fan speed from the four available
options, which represent the percentages of the
maximum fan speed: 0, 33, 66, or 100.
• Awnings: The Awning buttons allow you to extend or
retract the awning. Awnings will have no control unless
the parking brake is engaged. If you attempt to extend
or retract the awnings while the parking brake is not
engaged, an alert appears.
4 Parking Brake Alert
The Awning buttons function as follows:
– Tap the plus button (+) to extend the awning or the
minus button (–) to retract the awning, and a pop-up
message appears (assuming the parking brake is
engaged).
5 Awning Clear Message
– After you have verified that the awning is clear of
obstructions, tap the OK button. The awning is now
ready to extend or retract.
Operation
7