Panasonic CZ-02RT11P Manuel D'installation page 3

CZ-02RT11P
READ THIS MANUAL
BEFORE STARTING UP THE UNIT. DO
NOT THROW IT AWAY. KEEP IT IN YOUR
FILES FOR FUTURE REFERENCE.
IMPROPER
ATTACHMENT
ACCESSORIES
ELECTRIC SHOCK,
LEAKS, FIRE OR OTHER DAMAGE TO
THE EQUIPMENT. BE SURE ONLY TO
USE ACCESSORIES
PANASONIC WHICH ARE SPECIFICALLY
DESIGNED FOR THE USE WITH THE
EQUIPMENT
INSTALLED BY A PROFESSIONAL.
IF UNSURE OF INSTALLATION PROCE-
DURES OR USE, ALWAYS CONTACT
YOUR DEALER
INFORMATION.
The kit includes the following parts:
Remote controller
CZ-02RT11P
Remote controller
4PW15514-1
Remote controller
ATTENTIVELY
INSTALLATION OR
OF EQUIPMENT OR
COULD RESULT IN
SHORT-CIRCUIT,
MADE BY
AND HAVE THEM
FOR ADVICE AND
Wood screws
Wall plugs
1. Remove the upper part of remote
controller
(Refer to figure 1)
Insert a minus screwdriver into the slots (1) in the
lower part of the remote controller (2 places), and
remove the upper part of the remote controller.
The PC board is mounted in the upper part
of the remote controller. Be careful not to
damage the board
screwdriver.
2. Fasten the remote controller
to figure 2)
1 for exposed mounting, fasten with the two
included wood screws (Ø4x30) and plugs.
2 for flush-mounting, fasten with the two
included machine screws (M4x16).
NOTE Choose the flattest place possible for the
mounting surface. Be careful not to
distort the shape of the lower part of the
remote controller by overtightening the
mounting screws.
Installation manual
Machine screws
with the minus
(Refer
Installation manual
1