Product Information; Inspecting Package Contents - Murphy HelmView HV1000 Manuel D'installation

Product Information

The HelmView™ marine display is designed for instrumentation on electronically controlled
engines communicating using the SAE J1939 Controller Area Network (CAN), NMEA 2000 or
a proprietary blend of protocols. The HelmView display is a multifunction tool that enables
operators to view many different engine, generator, or transmission parameters and service
codes, and can support many devices simultaneously.
Two mounting options are provided for the display. The in-dash mounting option requires a
hole to be cut for insertion of the display. A plastic installation template P/N 78000386 is
included in the box and a drawing is also provided in the back of this document.
The gimbal-mount method enables the display to be installed on a flat surface. It's design
allows you to rotate and tilt the unit for the best display position for the operator's viewing.

Inspecting Package Contents

Before attempting to install the product, it is recommended that you ensure all parts are
accounted for and inspect each item for damage (which sometimes occurs during shipping).
The items included in the box are:
• HV1000 unit
• front cover snap on – P/N 78-05-0302
• installation kit – P/N 78-00-0386 includes:
• 8 mounting screws and nuts
• extra SD card cover
• back plate (can be used as mounting template)
• manual
Section 78
05-19-06 - 1 -
00-02-0603