Specifications; First Use; Description Of Heater; Parts - MILL Oil Premium WiFi Serie Mode D'emploi

6
Specifications
AB-H1500WF

First use

A er turning on the heater for the first time or a er an extended period without use,
the heater can produce a burnt odor for a short time. This is normal.
Please read all the instructions carefully before use. Save the instruction manual for future use.
It is also normal for the heater to make "sounds" when it warms up or cools down.

Description of heater

See figure 1 on separate illustration sheet
1. Heat emission
2. LED display
3. Control panel
4. Output selector and thermostat
5. ON/OFF
6. Legs (aluminium)

Parts

See figure 2 on separate illustration sheet
1. 2 rails for the feet
2. 2 foot brackets
3. 8 screws (pre-mounted)

Assembly

See figure 3 on separate illustration sheet
1. The heater should be unplugged during assembly or disassembly.
2. Remove the pre-mounted screws on both legs before you insert them into the
brackets, so that you get a stable foot.
3. Attach the legs to the brackets by tightening 2 screws into each bracket.
4. Remove the pre-mounted screws from the bottom of the heater and place the
heater gently on its head to mount the feet.
5. Two screws must be fastened on each foot bracket.
6. A er the assembly is complete return the heater to its upright position before operation.
7. NEVER USE THE HEATER BEFORE THE LEGS HAVE BEEN TIGHTLY SCREWED.
Model Thermostat
WiFi
Color Amperage
White ~120V/60 Hz
Power Mill Heat
(W) Boost
1500 Yes 802.11b/g/n
WiFi