Instructions; Usage Without Wifi Connection - MILL Oil Premium WiFi Serie Mode D'emploi

8

Instructions

Control panel
See figure 7 on separate illustration sheet
1. Standby
2. Control light WiFi
3. Power indicator - shows whether the heater is using power or not
4. Desired room temperature
5,6,7 Indicates the output level
8. Timer function indicator
9. Output selector – push the button to change the desired power level.
3 power levels
10. WiFi button
11. Function button
12. Timer activation button
13. Thermostat - turn the selector to the le to decrease the temperature,
and turn the selector to the right to increase the temperature
14. Celsius
15. Fahrenheit
WARNING!
BE SURE THE FOOT IS FITTED CORRECTLY AND ACCORDING TO THE
INSTRUCTIONS BEFORE USING THE HEATER!
If the temperature sensor is not functioning properly, you will see this
symbol on the display. Please contact the dealer or importer.

Usage without WiFi connection

See figure 8 on separate illustration sheet
1. Plug the heater into a grounded outlet.
2. Press OFF/ON button.
3. Choose the desired power |, || or |||, by pressing the output selector. Turn the
thermostat to the desired temperature while looking at the display. As soon as the room
temperature drops below this level, the heater will automatically start again. When the
room has reached the desired temperature again, the heater will turn itself o .
4.The heater always show Fahrenheit when used for the first time. To change between
Fahrenheit and Celsius please press and hold the settings button for 5 seconds.
The thermostat goes from 41 to 95°F (5 to 35°C).
5. If you want to change the temperature in the room, repeat step 3.
6. The heater has an overheat protection that turns the device o if any parts become
extremely hot.
7. To turn o the heater, press the OFF/ON button. Should the heater be le unused for
a longer period of time, pull out the plug.