11 | Activating Wifi; 11 | Deactivating Wifi; 11 | Reconnecting To Wifi; 11 | Memory Function With Wifi Connection - MILL Oil Premium WiFi Serie Mode D'emploi

11
millheat.com
Activating WiFi
See figure 10 on separate illustration sheet
Press «add heater» on the home screen in the Millheat-app. Follow the instructions in
the app.
Dectivating WiFi
See figure 11 on separate illustration sheet
Press 1 time on the WiFi button. The heater can now be used as described on page 8
(usage without WiFi connection). Relevant only if WiFi is already installed.
Reconnecting to WiFi
See figure 12 on separate illustration sheet
Press the WiFi button 1 time. Relevant only if WiFi is already installed.
Delete WiFi setting
See figure 13 on separate illustration sheet
Delete WiFi-settings: Press and hold WiFi button for 3 seconds.
The heater can also be reset to the factory settings by doing the following: Turn o
the heater's main switch. Press and hold while you switch on the heater's main
switch.
Memory function with WiFi connection
When the heater is connected to WiFi, it will automatically reconnect with WiFi (where
all temperatures are saved) a er a power cut.