Registering Magic Remote; Open Source Software Notice - LG UH60 Serie Manuel D'utilisation

C
Wheel (OK) Press the center of the Wheel button to select a
menu. You can change programmes by using the Wheel button.
(up/down/left/right) Press the up, down, left or
right button to scroll the menu. If you press
while the pointer is in use, the pointer will disappear from the screen
and Magic Remote will operate like a general remote control. To
display the pointer on the screen again, shake Magic Remote to the
left and right.
D
Returns to the previous screen.
Clears on-screen displays and returns to last input viewing.
Shows programme guide.
Used for viewing 3D video. (Only 3D models)
(INPUT) Changes the input source.
* Pressing and holding the button displays all the lists of exter-
nal inputs.
(Q. Settings) Accesses the Quick Settings.
button displays the All Settings
* Pressing and holding the
menu.
Coloured buttons These access special functions in some menus.
( : Red, : Green, : Yellow,
Teletext buttons ( , ) These buttons are used for
teletext.
You can zoom in on the area where the remote control is
pointed.
By zooming in on the selected area, you can view it in
full screen.

Registering magic remote

How to register the magic remote
To use the Magic Remote, first pair it with your TV.
1 Put batteries into the Magic Remote and turn the TV on.
2 Point the Magic Remote at your TV and press the
the remote control.
* If the TV fails to register the Magic Remote, try again after turning
the TV off and back on.
How to deregister the magic remote
Press the BACK and
seconds, to unpair the Magic Remote with your TV.
* Pressing and holding the
ister Magic Remote at once.
buttons
Licenses
Supported licenses may differ by model. For more information about
licenses, visit www.lg.com.

Open source software notice

: Blue)
information
To obtain the source code under GPL, LGPL, MPL and other open source
licenses, that is contained in this product, please visit http://opensource.
lge.com.
In addition to the source code, all referred license terms, warranty
disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a
charge covering the cost of performing such distribution (such as the cost
of media, shipping, and handling) upon email request to opensource@
lge.com. This offer is valid for three (3) years from the date on which you
purchased the product.
Wheel (OK) on
(HOME) buttons at the same time, for five
button will let you cancel and re-reg-
(Only UH95**, UH85**, UH77**,
75UH78**, 70UH70**)
17