Installation Instructions - La Sommeliere MZ135DZ Manuel D'instructions

To find out more about your product, consult the online EPREL database. As defined in Commission
Delegated Regulation (EU) 2019/2016, all information relating to this refrigeration appliance is
available on the EPREL Base (European Product Database for energy labeling). This database
enables you to consult the information and technical documentation of your refrigeration appliance.
You can access the EPREL Database by scanning the QR code on the energy label of your appliance
or by going directly to: www.ec.europa.eu and searching the reference of your refrigeration appliance.
Announced capacity
The advertised capacity is the maximum capacity calculated with a defined number of shelves which
varies depending on the model. This standard is calculated with 75cl traditional Bordeaux type bottles.
Any other type of bottle format as well as the addition of shelves will considerably reduce the storage
capacity.
Recommendation combination:
The following combination of shelves is recommended for energy to be used as efficiently as possible
by the refrigeration unit.
MZ135DZ / MZ165DP
10 shelves included 1 half-shelf

4. INSTALLATION INSTRUCTIONS

Before using this appliance
▪
Remove the exterior and interior packing.
▪
Before connecting the appliance to the power source, let it stand upright for approximately 24
hours. This will reduce the possibility of a malfunction in the cooling system from handling during
transportation.
▪
Clean the interior surface with lukewarm water using a soft cloth.
▪
When disposing your appliance, please choose an authorized disposal site.
▪
Place your wine cooler on a floor that is strong enough to support it when it is fully loaded. To
level your Wine cooler, adjust the front leveling leg at the bottom of the wine cooler.
▪
Adequate ventilation is required, do not block the front air outlet.
▪
This wine cellar is designed for free-standing
▪
Connect the cellar to a single socket, leaving a 30-mm gap between the back of the cellar and the
wall. Be careful to support it, so that your wine cellar is perfectly level (use of a spirit level is
recommended). This will prevent any movement due to instability, causing noise and vibration,
and will ensure that the door seals perfectly.
28
MZ180TZ