Installation Instructions - La Sommeliere SLS102DZ Notice D'utilisation

To find out more about your product, consult the online EPREL database. As defined in
Commission Delegated Regulation (EU) 2019/2016, all information relating to this
refrigeration appliance is available on the EPREL Base (European Product Database for
energy labeling). This database enables you to consult the information and technical
documentation of your refrigeration appliance. You can access the EPREL Database by
scanning the QR code on the energy label of your appliance or by going directly to:
www.ec.europa.eu and searching the reference of your refrigeration appliance.

4. INSTALLATION INSTRUCTIONS

Before using this appliance
▪
Remove the exterior and interior packing.
▪
Before connecting the appliance to the power source, let it stand upright for approximately
24 hours. This will reduce the possibility of a malfunction in the cooling system from
handling during transportation.
▪
Clean the interior surface with lukewarm water using a soft cloth.
▪
When disposing your appliance, please choose an authorized disposal site.
▪
Place your wine cooler on a floor that is strong enough to support it when it is fully loaded.
To level your Wine cooler, adjust the front leveling leg at the bottom of the wine cooler.
▪
Adequate ventilation is required, do not block the front air outlet.
▪
This wine cellar is designed for free-standing
▪
Connect the cellar to a single socket, leaving a gap between the back of the cellar and the
wall. Be careful to support it, so that your wine cellar is perfectly level (use of a spirit level is
recommended). This will prevent any movement due to instability, causing noise and
vibration, and will ensure that the door seals perfectly.
▪
This appliance is intended to be used exclusively for the storage of wine.
▪
This appliance is using flammability refrigerant. So never damage the cooling pipe work
during the transportation.
Caution
▪
This device is only intended to be installed in free standing, in no case it must be
installed in a built-in or embeddable way.
▪
Store wine in sealed bottles.
▪
Do not overload the cabinet.
▪
Do not open the door unless necessary.
▪
Do not cover shelves with aluminum foil or any other shelf material which may prevent air
circulation.
▪
Should the wine cooler be left empty for long periods it is suggested that the appliance is
unplugged, and after careful cleaning, leave the door ajar to allow air to circulate inside the
39