Publicité
Possible issues during assembly:
The two boards can't be aligned at the same level.
Ÿ
1
Holes on the boards and poles are not aligned, so screws can't be installed.
Ÿ
Recommended solution:
Please slightly loosen all screws and adjust the boards. Because the diameter of the holes on the pipes is 2-3 mm larger than that of
Ÿ
bolts, the position of the boards can be adjusted.
If it still doesn't work after adjustment, please contact us for more solutions.
Ÿ
1
2
1
2
2
Publicité
