General Information - caprari MEC-A Serie Notice D'utilisation Et D'entretien

motor is used;
pertinent Directives
INDEX
Declaration of conformity (removable)
1.

GENERAL INFORMATION

The instructions in this manual concerning safety are marked by this symbol. Failure to comply with these instructions
could expose personnel to health risks.
The instructions in this manual concerning electrical hazards are marked by this symbol. Failure to comply with these
instructions could expose personnel to risks of an electrical nature.
Instructions preceded by this word concern the main recommendations for correct installation, operation, preservation
ATTENTION
and disposal of the product itself. To ensure safe and reliable management of the product throughout its working life it is,
however, essential to comply with all the instructions in this manual.
Read the use and maintenance manual.
Take care of rotating parts.
1.2 General information:
Make sure that the items indicated on the consignment note correspond to those actually received and that these have not been damaged.
Before working on the purchased unit, please become fully familiar with all the instructions given in the supplied documentation.
The manual and all the supplied documents form an integral part of the product. They should be kept with care and be available for consultation for
as long as the product is in use.
No part of these documents may be duplicated in any form unless prior written authorization has been obtained from the manufacturer.
1.3 Example of a pump data plate
Code
N°
Ratio -
Q [l/s] [m 3 /h]
H max [m] Maximum head
1.4 Example of a motor data plate
Code
N°
l [A] Rated amperage draw
P [kW][HP] Rated power delivery
2
cos Power factor
IP54 Motor protection degree
Caprari S.p.A.
MEC-A / MEC-MR / MEC-AG / MEC-MG / HM / HMU / BHR
GB
ENGLISH
N°
n [min-1] Rpm rate
H [m] Nominal head
Rotation direction
MEI
U [V]
~
f [Hz]
n [min-1]
S1
I. Cl.
Rated powering voltage
Alternating current
Frequency
Rpm rate
Continuous service
Insulation class
GB
13