Changing Language; Programme Settings - Hoover HDPN 4S603PX Manuel D'utilisation

Settings Menu
From the settings menu, you can adapt
various parameters to your washing needs.
Accessing the Settings Menu
The dishwasher must ALWAYS be off
before you start this procedure.
l
Hold the Progr. button down and at the
same time press the ON/OFF button
for 3 seconds.
l
"SETTING" appears on the display.
l
Press the Progr. button again for the
menu items to appear on the display, in
the following sequence:
- WATER SOFTENER UNIT
(to set, see the relevant chapter in the
booklet).
- BUZZER
(to set, see the relevant paragraph).
- MEMO FUNCTION
(to set, see the relevant paragraph).
l
Press the HALF LOAD
button to change the current settings.
l
Press Progr. again to scroll through the
menu items.
l
Press the HALF LOAD
buttons together; Yes/No will appear
on the display.
Next time you switch on the
appliance
Press the Start/Reset button; the "ECO"
programme will appear on the display.
If memo mode is enabled, the memorised
programme will appear on the display.
l
l
l
l
l
or ExtraDry
and EXTRADRY
l
l
l
l
l
104

Changing language

Press the HALF LOAD
buttons together for 5 seconds.
"ENGLISH" appears on the display.
Follow the steps
"LANGUAGE SETTING" paragraph".
WARNING
This procedure will cancel all stored
settings, and the appliance will be
reset to the default factory settings.

Programme settings

Open the door and place dirty dishes
inside the appliance.
Either "ECO" programme will appear on
the display, or the programme that was
previously stored.
The duration of the programme will be
displayed to the left of the ring, while the
programme temperature will be displayed
to the right.
Select the desired programme by pressing
the "Progr." button several times.
Icons will light up on the display upon
enabling certain programmes.
To select an option, press the corresponding
button (the indicator light will turn on).
Press the "Start/Reset" button.
and EXTRADRY
detailed in the