MEMO FUNCTION (Memorising
the last programme used)
1. Hold the "Progr." button down and, at
the
same
time,
dishwasher using the "ON/OFF" button.
2. "SETTING" appears on the display.
3. Press the Progr. button until "MEMO
FUNCTION" appears on the display.
4. Then press either the "HALF LOAD" or
"EXTRADRY" button to change the
programme.
5. Switch off the dishwasher by pressing
the "ON/OFF" button to confirm the new
setting.
To change the stored programme, follow
the same procedure.
Enabling or disabling DEMO
MODE (be used exclusively in
stores)
Enabling
The dishwasher must ALWAYS be off
before you start this procedure.
1.Turn
on
the
ON/OFF button.
2.Press the Progr. and "START DELAY"
buttons together for 5 seconds.
3. "DEMO
MODE
appear on the display.
4.If no button is pressed for 30 seconds,
the programme will start, simulating the
start of a wash programme.
The Progr./Options/Start Delay options
are enabled, and by pressing these
buttons you can simulate the product's
functioning without starting a wash.
switch
on
appliance
using
ACTIVATED"
Disabling "Demo mode"
WARNING
the
Once installed, if the appliance works
correctly but the wash cycle does not
start upon pressing the Start button,
"Demo mode" may not have been
disabled.
The dishwasher must ALWAYS be off
before you start this procedure.
1. Turn on the appliance using the On/Off
button.
2. Press the Progr. and "START DELAY"
buttons together for 5 seconds
3. "DEMO MODE DISABLED" will appear
on the display.
4. Switch off the appliance.
CHILD LOCK
l
Pressing the EXTRADRY and START
DELAY buttons at the same time for
about 3 seconds allows you to lock all
keys. In this way, you can prevent any
the
unwanted or accidental changes.
l
The key lock can be cancelled by simply
pressing the EXTRADRY and START
DELAY buttons again or by switching off
the appliance.
will
Should
power
dishwasher
memory feature saves the settings and,
when
power
resumes the cycle from where it left off.
108
go
out
when
is
running,
a
returns,
the
appliance
the
special