Aqua Medic DC Runner x.3 Mode D'emploi page 8

Operation Manual for the App to control Aqua Medic pumps of the
1. APP Download
The APP name "Aqua Medic", is available in App Store for Apple users and Google Play for Android system users.
User can search "Aqua Medic" in either APP Store or Google Play to download the application. Alternatively, user
can scan the barcode on the package or on our homepage (www.aqua-medic.de) to download the application.
(Note: Scan function in certain countries or areas may not be able to read the barcode properly.) We
recommend to only use the APP on smartphones, since using it on tablets can lead to errors in the
display.
2. User registration, login and password reset
2.1. Account registration
Fig. 1: Aqua Medic App for controlling current, circulation and dosing pumps
Open Aqua Medic App and tap „CREATE NEW ACCOUNT".
Fill in the information as required and tap „CREATE NEW ACCOUNT".
After registration, return to the login page and create an account and password to log in.
Note: Please only use your e-mail address to register (no phone number), because registration by telephone
number cannot be used in Europe.
After successful registration, the desired pump can be installed and connected to the power supply via the
controller.
Fig. 2: Display pump controller
Press the WiFi button for about 5 seconds and the flashing icon indicates entering the smart network distribution
mode (WLAN). Press the WiFi button for about 10 seconds and the flashing icon and AP word in the lower right
corner indicate entering the AP network distribution mode.
The smartphone used has to be in the same WiFi network as the pump to be linked to.
2.2. Reset password
Tap "Forgot password" on the login page. Enter your e-mail address and tap
follow the instructions to reset your password.
DC Runner x.3 series
"Send link".
Check your e-mail and
8