Publicité
Les langues disponibles
Les langues disponibles
OPERATING INSTRUCTIONS
USB POWER ADAPTER
ITEM NO.: 518397 / SPS-1000 USB
ITEM NO.: 1414547 / SPS-1000WH
INTENDED USE
This product is designed to charge and power a USB device. The power consumption of the
connected USB device must not exceed 1 A. The product is protected against overload and short
circuits.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms,
must be avoided under all circumstances.
For safety and approval purposes (CE), you must not rebuild and/or modify this product. If you
use the product for purposes other than those described above, the product may be damaged.
In addition, improper use can cause hazards such as short circuiting, fire, electric shock etc.
Read the instructions carefully and keep them. Make this product available to third parties only
together with its operating instructions.
This product complies with the statutory national and European requirements. All company names
and product names are trademarks of their respective owners. All rights reserved.
DELIVERY CONTENT
• USB power adapter
• Operating instructions
Up-to-date Operating Instructions:
1. Open www.conrad.com/downloads in a browser or scan the
displayed QR code.
2. Select document type and language and enter the item number
into the search field. After submitting the query you can download
displayed records.
SAFETY INSTRUCTIONS
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on proper
handling in this manual, we assume no liability for any resulting personal injury or
damage to property. Such cases will invalidate the warranty/guarantee.
a) Persons / Product
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become dangerous
playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts,
high humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed if the
product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height can
damage the product.
• Also observe the safety and operating instructions of any other devices which are
connected to the product.
• Remove the product from the mains socket and the connected USB device when you
are not using it.
• The product generates heat during use. Ensure that there is sufficient ventilation and
do not cover the product during use.
• Do not use any force when connecting USB plugs. A USB plug can only be inserted
into the USB port in one orientation.
• The mains socket that the device is plugged into must be easily accessible.
• Never connect or disconnect power adapters if your hands are wet.
• Never leave the product and the connected device unattended during use.
• For safety reasons, disconnect the product from the mains socket during storms.
• Only connect the power adapter to a normal mains socket connected to the public
supply. Before plugging in the power adapter, check whether the voltage stated on the
power adapter complies with the voltage of your electricity supplier.
• Never use the product immediately after it has been brought from a cold room into a
warm one. The condensation generated could destroy the product. The plug-in power
supply unit also involves danger to life by electric shock! Allow the product to reach
VERSION 03/16
room temperature before connecting it to the power supply and putting it to use. This
may take several hours.
b) Miscellaneous
• Consult an expert when in doubt about operation, safety or connection of the device.
• Maintenance, modifications and repairs are to be performed exclusively by an expert or
at a qualified shop.
If you are not sure about the correct connection or use, or if questions arise which are not covered
by these operating instructions, please do not hesitate to contact our technical support or another
qualified specialist.
OPERATION
Always turn off the USB device that you want to connect before connecting it to
the USB port.
Ensure that the product is connected properly. If it is not connected properly,
it may become hot or cause an electrical shock or fire.
Ensure that your device is suitable for the connection ratings of the product
(see technical data).
1. Turn off the USB device and connect it to the product. Use a suitable USB cable to connect the
device to the power adapter.
2. Insert the product into a mains socket.
3. The USB device will now charge. If you wish to use the USB device, you may now turn it on.
Check the charging/operating status of your USB device.
4. Turn off your USB device before removing the product from the mains socket.
5. Unplug the product from the mains socket after use.
MAINTENANCE AND CLEANING
You do not need to carry out maintenance work on the product. Under no circumstances should you
service any of the components in the interior of the product, therefore never disassemble it.
Do not immerse the product in water.
Remove the product from the mains socket and the connected USB device before cleaning.
Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these could
damage the casing or even impair the functioning of the product.
Use a dry, soft and clean cloth to clean the product.
DISPOSAL
Electronic devices are recyclable waste and must not be disposed of in the household
waste.
At the end of its service life, dispose of the product according to the relevant statutory
regulations.
You thus fulfil your statutory obligations and contribute to the protection of the environment.
TECHNICAL DATA
Input voltage / current .......................100 – 240 V/AC, 50/60 Hz, 0.13 A
Output voltage / current ....................5 V/DC, max. 1 A , 5 VA
Connection .......................................USB, type A
Protection class ................................II
Operating conditions .........................0 to +35 °C, 20 – 85 % RH (non-condensing)
Storage conditions ............................-20 to +60 °C, 10 – 90 % RH (non-condensing)
Dimensions (W x H x D) ...................40 x 23 x 74 mm
Weight ..............................................Approx. 40 g
Legal notice
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data processing
systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent the technical status at the
time of printing.
© Copyright 2016 by Conrad Electronic SE
V3_0316_02-LS
Publicité
