TurhanCelik 630 Serie Mode D'emploi page 10

 The appliance should be operated at max. stage for an hour during the first operation.
 Before using the grill, carefully clean all surfaces likely to come into contact with food.
6. OPERATION
 Switch on W autmat which is connected to the appliance.
 Yellow indicator will be on.
 Thermostad control kmob should be set required value, ın this stuation, yellow indicator will be on. When the
temperature reaches the required value yellow indicator will be off.
7. SWITCHING OFF
 Thermostat control knob should be set to "0" stage.
 Switch control knob should be set to "0" stage.
 Switch off W automat which operates the appliance.
8. CLEANING PROCESS
 It is so easy to clean the appliance as it's made of AISI 304 stainless steel.
 There should not be any electricity at the appliance during the cleaning process.
 Clean the appliance with warm soapy water at the end of every working day when it is still warm.
 Do not use any abrasive detergents or wire brushes that may scrape the surface of the appliance.
 If the surface of the appliance can not be cleaned by above mentioned methods, apply chemical solvents on the
surface.
 Do not clean the appliance with pressure water or steam pressure.
9. MAINTENANCE
 The appliance has no part to be repaired by the user.
 In case of noticing any dangerous situation at the appliance, call the authorized technical service.
 Unexperienced person shouldn't control the appliance.
 If the appliance will not be operated for a long time, apply a thin layer of vaseline on the stainless steel surface of
the appliance.