Install The Battery Pack; Remove The Battery Pack; Operation; Examine The Chain Oil - GreenWorks Pro PSB401 Manuel De L'opérateur

• Never use a left-handed (cross-handed) grip, or any
stance that places your body or arm across the chain
line.
• Never stand directly under the limb you are cutting.
• Periodically examine the tightness of the collars during

operation.

7.7

INSTALL THE BATTERY PACK

WARNING
• If the battery pack or charger is damaged, replace the
battery pack or the charger.
• Stop the machine and wait until the motor stops before
you install or remove the battery pack.
• Read and understand the instructions in the battery and
charger manual.
1. Align the lift ribs on the battery pack with the grooves in
the battery compartment.
2. Push the battery pack into the battery compartment until
the battery pack locks into place.
3. When you hear a click, the battery pack is installed.
7.8

REMOVE THE BATTERY PACK

1. Push and hold the battery release button.
2. Remove the battery pack from the machine.
8 OPERATION
Remove the battery pack and keep hands clear of the lock
out button when you move the machine.
IMPORTANT
Examine the chain tension before each use.
8.1

EXAMINE THE CHAIN OIL

NOTE
Do not use the machine without sufficient chain oil.
NOTE
English
1. Examine the oil level of the machine from the oil
indicator.
2. Add the oil if it is necessary.
8.2

START THE MACHINE

1. Press the lock-out button (16).
2. Press the trigger (17) while you hold the lock-out button.
3. Release the lock-out button.
8.3

STOP THE MACHINE

1. Release the trigger to stop the machine.
8.4

DELIMBING A TREE

B
A
Make sure that there is nothing or nobody in the area where
the branches fall.
• Stand opposite the branch you will cut.
• Start to cut the higher branches.
• Then cut the lower branches.
• Cut downwards to prevent the bar from jamming.
8.5

LIMB TREE BRANCHES

Limbing is to remove the branches from a fallen tree.
9
WARNING
EN