Connecting To A Dvd Player/Digital Tuner - Sony VPL-HS3 Mode D'emploi

Connecting to a DVD Player/Digital Tuner

To connect to a DVD player/digital tuner equipped with component video
connectors
You can connect a DVD player/digital tuner equipped with component video connectors using the supplied signal
interface cable.
: Video signal flow
Tips
• To connect the projector to a DVD player/digital tuner which is not equipped with component video connectors, use the S video cable of
the DVD player/digital tuner.
• To connect the projector to a DVD player/digital tuner which is not equipped with S video output, use the video cable instead of the S
video cable.
• To connect the projector to a DVD player/digital tuner equipped with a D connector, use a commercially available conversion cable.
To connect to a DVD player/digital tuner equipped with HDMI output
You can enjoy better picture by connecting a DVD player/digital tuner equipped with HDMI output to the HDMI
input of the projector.
: Video signal
flow
10
Step 2: Connecting the Projector
GB
Rear of the projector
DVD player, digital tuner, etc.,
with SONY logo upside
Signal interface cable (SIC-HS40, supplied)
Rear of the projector
HDMI cable (not supplied)
AV amplifier
with component video
connectors
Y
Active
speakers
P / P / S Video
R
B
C C Video
B R
DVD player, digital
tuner, etc., with the
HDMI output
to HDMI output