Emergency Mode; Entering Or Exiting Emergency Mode (Tmo & Dmo); Invisible Emergency Mode; Sending An Emergency Alarm - Motorola MTM800 Guide De L'utilisateur

Emergency Mode

You can send and receive Emergency Group Calls in
Trunked Mode (TMO) or in Direct Mode (DMO). If your terminal
is configured to operate through a gateway, Emergency calls can
be placed through the gateway.
You can initiate an Emergency Group Call to and receive it from the
selected talkgroup (TMO and DMO).
Your Service Provider will configure the Emergency Alarm and Hot
Microphone features.
Emergency calls will be allocated emergency priority in the system.
Entering or Exiting Emergency Mode (TMO & DMO)
To enter Emergency mode from any mode, press and hold the
emergency button
For call alerts, see settings in the Tones menu option.
The required time you need to press the Emergency button is set to
default to 2 seconds. The time can be configured by your Service
Provider.
To exit Emergency mode, press and hold
normal Group mode.

Invisible Emergency Mode

If the Invisible Emergency Mode is enabled by your Service
Provider, all the audible and visible indications for operations in
Emergency Mode are disabled.
Only the Emergency Private Call is exception for this feature.

Sending an Emergency Alarm

Your MTM800 will automatically send an Emergency Alarm when in
Emergency mode. This is sent:
• automatically, upon entering Emergency mode
• if you press
mode.
.
again while the MTM800 is in Emergency
. You will switch to
23