Lindy 38215 Manuel Utilisateur page 8

User Manual
Command
R CONTRAST
S BRIGHTNESS 0 – 60
R BRIGHTNESS
S HUE 0 – 60
R HUE
S SATURATION 0 – 60
R SATURATION
S SHARPNESS 0 – 30
R SHARPNESS
S NR 0 – 3
R NR
S AUDIO DELAY 0 – 3
R AUDIO DELAY
S AUDIO MUTE 0/1
R AUDIO MUTE
S KEY LOCK 0/1
R KEY LOCK
S AUTOSCAN 0/1
R AUTOSCAN
FW
S RESET 1
OSD – On Screen Display
Enter the OSD by pressing the Menu button on either the Transmitter or the IR remote control.

Bold values are the default setting.
st
1 Layer
DISPLAY
Description
Reports the numeric value of CONTRAST setting as above
Set the numeric value for BRIGHTNESS from 0 – 60
Reports the numeric value of BRIGHTNESS setting as above
Set the numeric value for HUE from 0 – 60
Reports the numeric value of HUE setting as above
Set the numeric value for SATURATION from 0 – 60
Reports the numeric value of SATURATION setting as above
Set the numeric value for SHARPNESS from 0 – 30
Reports the numeric value of SHARPNESS setting as above
0=OFF, 1=LOW, 2=MIDDLE, 3=HIGH
Reports the numeric value of NOISE REDUCTION setting as above
0=OFF, 1=40ms, 2=110ms, 3=150ms
Reports the numeric value of AUDIO DELAY setting as above
0=ON, 1=OFF
Reports the numeric value of AUDIO MUTE setting as above
0=ENABLE, 1=DISABLE
Reports the numeric value of KEY LOCK setting as above
0=DISABLE, 1=ENABLE
Reports the numeric value of AUTOSCAN setting as above
Checks the current firmware version
Resets the Transmitter to default values
nd
2 Layer
OUTPUT
rd
3 Layer
Native
640X480 60
800x600 60
1024x768 60
1360x768 60
1280x720 60
1280x800 60
1280x1024 60
1440x900 60
1400x1050 60
1680x1050 60
1600x1200 60
1920x1080 60
1920x1200 60
English
th
4 Layer