User Manual
Overview
Front Panel
2
1
Service
1.
This port is reserved for Firmware updates only.
IR
2.
Receives the IR commands of the supplied IR Remote.
HDMI In
3.
Connect to HDMI source equipment such as a PC or Blu-ray player.
VGA In
4.
Connect to VGA source equipment such as a PC.
Audio In
5.
Connect to audio equipment using a 3.5mm to 3.5mm or 3.5mm to Phono cable.
Menu
6.
Press this button to enter the Transmitters On Screen Display (OSD).
Input
7.
Press this button to quickly Switch between VGA and HDMI inputs.
HDMI/PC LED
8.
Illuminates RED when HDMI input is active and Green when PC/VGA input is active.
9.
-/+
When in the OSD menu use these buttons to navigate up and down.
10. Enter
When in the OSD menu press this button to make a selection. Press this button and – together to
instantly switch the output resolution to 720p@60. Press this button and + together to instantly
switch the output resolution to XGA 1024/768.
3
4
8
7
5
6
9
English
10