Installation And Operation Instructions - 3M Macurco Directives D'utilisation

• Size: 3-1/8 x 5-1/8 x 1-1/2 inch (7.94 x 13.02 x 3.81 cm)
• Alarm Relay: SPST, 100mA, 40VDC
• Trouble Relay: SPST 100mA, 40VDC
• Buzzer Rating: 85 dBA at 10 Feet
• Shipping Weight: One pound
• Operating Temp. Range: 40°F (4.4°C) to 100° F (37.8°C)
• Alarm Setting: Per UL 2034
• Color: White
• Designed for use with a UL Listed Fire Alarm/Burglary Control Panel

INSTALLATION AND OPERATION INSTRUCTIONS

The following instructions are intended to serve as a guideline for the use of the 3M™ Macurco™ CM-E1 Carbon Monoxide
Detector. It is not to be considered all-inclusive, nor is it intended to replace the policy and procedures for each facility.
This detector helps monitor for the presence and concentration level of carbon monoxide gas. Misuse may produce
an inaccurate reading, which means that higher levels of the gas being monitored may be present and could result in
overexposure and cause sickness or death. For proper use, see supervisor or User Instructions, or call 3M in U.S.A.,
1-800-243-4630. In Canada, call Technical Service at 1-800-267-4414.
WARNING
9