General Safety Information; Intended Use; List Of Warnings And Cautions - 3M Macurco Directives D'utilisation

GENERAL SAFETY INFORMATION

Intended Use

The CM-E1 is a low voltage (9-32 VDC) detector of Carbon Monoxide (CO). The CM -E1 is designed for connection to UL
Listed Fire Alarm/Burglary Control Panels. NOTE: Any time the words "Control Panel" or "Alarm Panel" or "Alarm Control
Panel" are used in these instructions, they refer to a UL Listed Fire Alarm/Burglary Control Panel. Alarm control panels that
work on 12 or 24 VDC can provide battery backup to the CM-E1 detectors. This carbon monoxide detector is designed to
detect CO gas from ANY source of combustion. It is NOT designed to detect smoke, fire or any other gas.
List of Warnings and Cautions within these User Instructions
Each person using this equipment must read and understand the information in these User Instructions before use. Use
of this equipment by untrained or unqualified persons, or use that is not in accordance with these User Instructions, may
adversely affect product performance and result in sickness or death. For proper use see User Instructions, or call 3M
in U.S.A., 1-800-243-4630. In Canada, call Technical Service at 1-800-267-4414.
Use only for monitoring the gas which the sensor and detector are designed to monitor. Failure to do so may result in
exposures to gases not detectable and cause sickness or death. For proper use see User Instructions, or call 3M in
U.S.A., 1-800-243-4630. In Canada, call Technical Service at 1-800-267-4414.
2
WARNING