Important - pclocs Carrier 15 Notice D'utilisation

Carrier 15 Charging Station™
STEP 5 - Mounting the Carrier 15 Charging Station
IMPORTANT: Only a suitably qualified installer may mount this unit. Refer to a
structural specialist to determine if the wall you intend to mount this unit on is
capable of supporting the fully loaded Carrier 15 Charging Station. When mounting
to a wall, ensure that the unit is mounted level or slightly tilted backwards to ensure
that the door does not swing open when the padlock is removed. Use washers or
Note the mounting holes for wall mounting:
TOP
Note the mounting holes for desk mounting:
STEP 6 - Resetting the Power Strips
If there is a power surge and the power is tripped in the Carrier 15 Charging Station,
press the red reset button on each power strip to reset.
other suitable spacers.
Refer to drilling drawing for correct hole locations.
Note the mounting holes for wall mounting:
BOTTOM