ECOVACS ROBOTICS DEEBOT 710 Manuel D'instructions page 9

1. Important Safety Instructions
User manuals for transmitters equipped with detachable
antennas shall also contain the following notice in a
conspicuous location:
This radio transmitter (identify the device by certification
number, or model number if
Category II) has been approved by Industry Canada to
operate with the antenna types listed below with the maximum
permissible gain and required antenna impedance for each
antenna type indicated. Antenna types not included in this list,
having a gain greater than the maximum gain indicated for that
type, are strictly prohibited for use with this device.
IMPORTANT NOTE:
Radiation Exposure Statement:
This equipment complies with "Industry Canada RSS-102
for radiation exposure limits set forth for an uncontrolled
environment".
This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
To disable Wi-Fi module on DEEBOT, power the robot ON.
Place the robot on the Docking Station making sure the
Charging Contacts on DEEBOT and the Docking Station Pins
make a connection.
Press and hold the AUTO Mode Button on the robot for 20
seconds until DEEBOT emits 3 beeps.
To enable Wi-Fi module on DEEBOT, power the robot OFF
and then power ON. The Wi- Fi module is turned on when
DEEBOT is restarted.
9
EN