GE Zoneline AZ45 Manuel D'utilisation page 23

Installation Instructions
INSTALLING THE ZONELINE (cont.)
3. INSTALL THE UNIT
INTO THE WALL CASE
Slide the unit into the wall case and secure with four
screws through the unit flange holes.
sits under the control panel, sitting in the pocket in
the base pan.
NOTE:
flanges for installation in wall cases other than GE
the installer should use an awl or other sharp tool
to puncture the insulation in the appropriate holes
before installing the attachment screws.
4. CONNECT POWER
CORD OR DIRECT
CONNECT KIT
Review installation instructions provided with
power cord or direct connect kits for detailed
assembly instructions.
Power supply kit
(Appearance may vary)
49-5000355 Rev. 2
5. REPLACE THE ROOM
FRONT
Reinstall the room cover by aligning and placing the
23