Humidity Controlled Crispers - LG LRFDS3006 Serie Manuel Du Propriétaire

34 OPERATION
packaging should be wiped down to prevent
adjacent foods from being contaminated.
NOTE
• If the refrigerator is kept in a hot and humid
place, frequent opening of the door or storing a
lot of vegetables in the refrigerator may cause
condensation to form. Wipe off the
condensation with a clean cloth or a paper towel.
• If the refrigerator door or freezer drawer is
opened or closed too often, warm air may
penetrate the refrigerator and raise its
temperature. This can increase the running costs
of the unit.
Humidity Controlled
Crispers
Using the Humidity Controlled
Crispers
This feature is only available on some models.
The crispers provide fresher tasting fruit and
vegetables by letting you easily control humidity
inside the drawer.
You can control the amount of humidity in the
moisture-sealed crispers by adjusting the control
to any setting between Vegetables and Fruit.
• Vegetables keeps moist air in the crisper for
best storage of fresh, leafy vegetables.
• Fruit lets moist air out of the crisper for best
storage of fruit.
Removing/Assembling the

Humidity Controlled Crispers

1
Open the doors completely and remove the
contents of the Door-in-Door case. Lift up and
pull out the Door-in-Door case.
NOTE
• The Door-in-Door feature is only available on
some models.
2
Pull out the crisper to full extension, lift the
front up, and pull straight out.
3
To reassemble, slightly tilt up the front, insert
the crisper into the frame and push it back
into place.
4
Line up the tabs on the Door-in-Door case
with the slots on the door and push down
until it snaps into place.
NOTE
• The Door-in-Door feature is only available on
some models.