Humidity Controlled Crispers - LG LMWS27626 Serie Manuel Du Propriétaire

Humidity Controlled
Crispers
Using the Humidity Controlled
Crispers
This feature is only available on some models.
The crispers provide fresher tasting fruit and
vegetables by letting you easily control humidity
inside the drawer.
You can control the amount of humidity in the
moisture-sealed crispers by adjusting the control
to any setting between Vegetables and Fruit.
• Vegetables keeps moist air in the crisper for
best storage of fresh, leafy vegetables.
• Fruit lets moist air out of the crisper for best
storage of fruit.
Removing/Assembling the

Humidity Controlled Crispers

1
Open the doors completely and remove the
contents of the Door-in-Door case. Lift up and
pull out the Door-in-Door case.
NOTE
• The Door-in-Door feature is only available on
some models.
2
Pull out the crisper to full extension, lift the
front up, and pull straight out.
3
Lift the front of the cover up with both hands
until it detaches from the back wall of the
cabinet, then pull it out.
4
To reassemble, insert the cover into the
refrigerator with both hands and lower it onto
the guides.
5
Slightly tilt up the front, insert the crisper into
the frame and push it back into place.
6
Line up the tabs on the Door-in-Door case
with the slots on the door and push down
until it snaps into place.
NOTE
• The Door-in-Door feature is only available on
some models.
OPERATION 27