SmartGyro ziro Manuel D'utilisation page 31

Note that the approximate charging time is between 4-5 hours. Do not
leave the product charging once the light of the adapter has changed to
green or overcharge the battery for more than 3 hours.
IMPORTANT:
a) The load will be approximately 4-5 hours.
c) Do not overload the unit, as this will shorten the life of your battery and
its charger.
Tips to keep in mind when loading
- Load preferably in places away from flammable products.
- Monitor and control the loading period (which does not exceed the
recommended period).
- Use only the original charger.
- Do not leave the skate loading at night.
- If the skate has been exposed to high temperatures, wait and check
that it is not hot before putting it back on.
- For the charging procedure it is important that the skate is switched off
and that there is no accessory connected, as if it is not possible for
one of the sensors to remain activated and the battery to overheat.
- When the charger LED goes from red to green, it is when the smart-
Gyro is charged.
- Can not be charged with the ignition or working.
Ziro- Manual
smartgyro.es smartgyro.es
30 12