Control Panel - SmartGyro ziro Manuel D'utilisation

EN

CONTROL PANEL

1. Long press the power switch button to turn on the machine and the
frotn light buttom atmosphere ligth, tail light, and brake light are all on.
The control panel shows the power and speed.
2. After turn on, the control panel display shows "1" indicating that the
speed is 1st gear. Press the button to change to 2nd gear; the highest
display is 3rd gear.
3. Press the button twice the fron light and press the buton twice the
front light is off.
4. Press the button three times to display the total mileage, then press
the button three times to display the speed.
5. When you use the brake, the brake light will get brighter.
6. Battery status indicating: five lights are 100%, four lights are 80%,
three lights are 60%, two lights are 40%, one light is 20%.
7. The scooter will power off automatically after 15 minutes without riding
and operation.
25