Accessories; Sensors; Vbus ® Accessories - Resol DeltaSol AL E Manuel

6

Accessories

6.1

Sensors

Sensors
The product range includes high-precision platinum
temperature sensors, flatscrew sensors, outdoor tem-
perature sensors, indoor temperature sensors, cylind-
rical clip-on sensors, also as complete sensors with
immersion sleeve.
Overvoltage protection device
In order to avoid overvoltage damage at collector
sensors (e.g. caused by local lightning storms), we
recommend installting the overvoltage protection
RESOL SP10.
RESOL SP10 Article no.: 180 110 70
6.2 VBus accessories
®
Smart Display SD3 / Large display module GA3
The RESOL GA3 and SD3 display modules are used
for visualising data issued by the controller: collector
temperature, store temperature and energy yield of
the solar thermal system. The use of high-efficiency
LEDs and filter glass assures a high optical brilliance
and good readability even in poor visibility conditions
and from a larger distance. Both display modules are
connected to the controller via the RESOL VBus
RESOL SD3 Article no.: 180 004 90
RESOL GA3 Article no.: 180 006 53
RESOL VBus / USB interface adapter
®
The new VBus / USB interface adapter is the inter-
®
face between the controller and a personal compu-
ter. With its standard mini-USB port it enables a fast
transmission of system data for processing, visualising
and archiving as well as the parametrisation of the
controller via the VBus . A full version of the RESOL
®
ServiceCenter software is included.
RESOL VBus ® / USB Article no.: 180 008 50
RESOL DL2 Datalogger
This additional module enables the acquisition and
storage of large amounts of data (such as measuring
and balance values of the solar system) over a long
period of time. The DL2 can be confi gured and read-
out with a standard internet browser via its integrated
web interface. For transmission of the data stored in
the internal memory of the DL2 to a PC, an SD card
can be used. The DL2 is appropriate for all controllers
with RESOL VBus ® . It can be connected directly to
a PC or router for remote access and thus enables
.
®
comfortable system monitoring for yield monitoring
or for diagnostics of faults.
RESOL DL2
RESOL AM1 Alarm module
The AM1 Alarm module is designed to signal system
failures. It is to be connected to the VBus
troller and issues an optical signal via the red LED if
a failure has occurred. The AM1 also has a potential-
free relay output, which can e. g. be connected to a
building management system (BMS). Thus, a collective
error message can be issued in the case of a system
failure.
RESOL AM1
Article no.: 180 007 10
® of the con-
Article no.: 180 008 70
35