Mode B; Switching The Mode; Supported Load - CROMAKIT RSLAB-7 Manuel D'utilisation

Junio 2011
The LCD displays run modes "StA"、"A" or "B" for about 2 seconds.
The set or stored speed value is shown in the left display, and the set or stored time value is shown in
the right display. Turn the speed knob and time knob can set the speed and time.
After pressing the speed knob or time knob, the instrument begins to run at the set speed. The actual
speed and time remaining are shown in the LCD. If the remaining has reached zero, the shaker stops its
motion. Pressing the speed knob alone, the instrument will work at continuous mode(The time
function is OFF)
b. Mode B
When the instrument is turned ON and values for speed and time are erased to zero, users can set..
The upper speed limit that has been set is taken over from operating mode A and cannot be modified..
After the power has been turned OFF, the instrument will no longer automatically start up in operating
Mode B by itself.
After turning ON the instrument and selected run mode, the following process will be shown on the
display.
The left LCD displays "SAF" and the right displays the upper speed limit (rpm）which cannot be
changed.
The LCD displays run modes "StA" for about 2 seconds.
The set speed value is shown in the left display, and the set time value is shown in the right display.
Then set the motor rotary speed and time.
After pressing the speed knob or time knob, the instrument begins to run at the set speed. The actual
speed and time remaining are shown in the LCD. If the remaining has reached zero, the shaker stops
its motion.
c.

Switching the mode

Hold down both knobs and turn ON the instrument with the mains switch. After about 5 second, you
can let go of the knobs..

7- Supported load

In order to ensure safe, the shaker must only be operated within the supported: 2,5kg or 7,5kg.
Make sure the holding surface of the shaker is always clean and level. Ensure the individual shaking
vessels must be placed evenly and fastened securely in the middle of the shaking table no matter one
or multiple shaking vessels are placed.
- 6 -