Inspetion; Trial Run; Control And Set; Control - CROMAKIT RSLAB-7 Manuel D'utilisation

Junio 2011
test tubes for a maximum supported weight of 7.5 kg (330) and 2.5Kg (180). This instrument is not
suitable for use in residential areas or other areas that may cause danger to the user or instrument as
mentioned in chapter 1

3- Inspetion

Unpack the instrument carefully and check for any damages which may have arisen during transport. If
it happens, please contact distributor for technical support.
If there is any apparent damage to the system, please do not plug it into the power line.
RSLAB-7 and RSLAB-7PRO are supplied with the following items:
-Stirrer
-Power cable
-User manual

4- Trial run

Make sure the required operating voltage and power supply voltage match.
Ensure the socket is securely earthed.
Plug in the power cableand power ON the instrument.
LCD displays the safe rotary speed limit and operating mode.
Turn the speed knob to set the rated rotary speed
Press the speed knob. And the shaking function is switched ON.
Press the motor regulation knob again. and the shaking function is switched OFF.
If these operations above are normal, the instrument is ready to operate following the
operation" chapter.
If these operations are not normal, the instrument may be in security protection state or
be damaged. Please contact with distributor Technical support.
You can improve the stability of the instrument with the adjustable
feet.

5- Control and set

a.

Control

.
1ud
1ud
1 ud
- 4 -