Refrigerator Care Checklist; Defrosting - Norcold Polar 10 Serie Manuel D'utilisation

Masquer les pouces Voir aussi pour Polar 10 Serie:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Make sure that the ice maker arm can move freely and does not touch the frozen
NOTICE
foods in the freezer.
3. Push the ice maker arm down to the ON position [50] (See Art 01015).
If you operate the refrigerator without connecting the water supply line and/
!
CAUTION
or opening the water shut off valve of the vehicle, make sure the ice maker
arm is up in the OFF position.
4. Allow the freezer to cool enough and ice production will begin to fill the storage bin [61].
New plumbing connections and/or impurities in the water supply line after winterizing
NOTICE
can cause the first ice to be discolored or have an odd flavor.
5. To stop the ice maker, push the ice maker arm up to the OFF position [62].

Refrigerator Care Checklist

Your refrigerator will give you years of trouble free service if you do these simple checks every three to six months:
- Keep the food compartment and the freezer clean. See "Cleaning".
- Defrost the refrigerator as necessary. See "Defrosting".
- Make sure the door seals correctly. See "Door Sealing".
- Be aware of any cooling changes that are not because of weather, loading, or gas control changes. If changes occur, contact your
dealer or service center.
- Make sure the gas supply is propane gas only and not butane or a butane mixture.
- When in propane gas operation, examine the appearance of the flame. See "Gas Flame Appearance".
- Make sure the air flow in the lower intake vent, through the refrigerator coils and condenser, and out the upper exhaust vent is not
blocked or decreased.
- Make sure the area behind the refrigerator is clear. Do not use the area behind the refrigerator for storage of anything, especially
gasoline and other flammable vapors and liquids.

Defrosting

The cooling fins of the refrigerator operate at below freezing temperature and will naturally form frost from humidity, which is always
present in the air. The humidity inside the refrigerator increases:
- with higher outside temperature and humidity.
- with the storage of non-sealed fresh foods or warm foods.
- with the amount of time that the door(s) are open.
- with any air leakage into the refrigerator.
Although the refrigerator is not frost -free, it is made to limit frost on the cooling fins. At regular intervals, the temperature control system
automatically melts most of the frost from the cooling fins. The water from the cooling fins drains into a collection cup that is attached to
the back of the refrigerator. The heat of the cooling system evaporates the water from the collection cup.
Owner's Manual 10
62
60
61
Art 01015

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Polar n10lxPolar na10lx

Table des Matières