Inserting an SD card
When a commercially available SD card is inserted, recordings can still be made to the
card without stopping when the remaining recording time on the internal memory runs
out.
1
Close the LCD monitor.
(Base)
*
Turn off the power of the unit before
inserting or removing a card.
■
To remove the card
Push the card inward once, then pull it out straight.
(Base)
NOTE
Operations are confirmed on the following SD cards.
Manufacturer
Video
Still Image
Using cards other than those specified above may result in recording failure or
●
data loss.
For more information, refer to the Detailed User Guide
8
http://manual.jvc.co.jp/index.html/
Panasonic, TOSHIBA, SanDisk, ATP
Class 4 or higher compatible SDHC card (4 GB to
32 GB)
SD card (256 MB to 2 GB), SDHC card (4 GB to 32 GB)
2
Open the cover.
3
Insert an SD card.
Label