Assembling the Cables
¦
Enclose the cables in the Holder-Wire Cable so that the cables are not visible through
the transparent stand.
Wall Mount Kit Specifications (VESA)
¦
Install your wall mount on a solid wall perpendicular to the floor. When attaching to
other building materials, please contact your nearest dealer. If installed on a ceiling or
slanted wall, it may fall and result in severe personal injury.
Standard dimensions for wall mount kits are shown in the table above.
N
When purchasing our wall mount kit, a detailed installation manual and all parts
N
necessary for assembly are provided.
Do not use screws longer than the standard dimension, as they may cause
N
damage to the inside of the TV set.
For wall mounts that do not comply with the VESA standard screw specifications,
N
the length of the screws may differ depending on their specifications.
Do not use screws that do not comply with the VESA standard screw
N
specifications.
Do not fasten the screws too strongly, this may damage the product or cause the product to fall, leading to personal injury.
N
Samsung is not liable for these kinds of accidents.
Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the
N
consumer fails to follow the product installation instructions.
Our 57" and 63" models do not comply with VESA Specifications. Therefore, you should use our dedicated wall mount kit for
N
this model.
Do not exceed 15 degrees tilt when mounting this TV.
N
Product Family
LCD-TV
PDP-TV
LFD
Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock.
inches
VESA Spec. (A * B)
19~22
100 X 100
23~29
200 X 100
30~40
200 X 200
46~55
400 X 400
57~70
800 X 400
80~
1400 X 800
42~50
400 X 400
58~63
600 X 400
70~
800 X 400
80~
1400 X 800
30~39
200 X 200
40~52
400 X 400
55~70
800 X 400
70~
1400 X 800
English - 8
Standard Screw
Quantity
M4
M6
M8
M8
M6
M8
4
4
4