Samsung 7 Serie Guide De L'utilisateur page 36

When unable to connect to an AP
N
Your TV may fail to locate an AP that is configured as a private SSID type. In this case, please change the AP settings and try
again. If your Internet service provider has registered the MAC address of the device used to connect to the Internet for the
first time and authenticates the MAC address each time you connect to the Internet, your TV may not be able to connect to the
Internet as the MAC address differs from that of the device (PC).
In this case, ask your Internet service provider about the procedures to connect devices other than your PC (such as your TV)
to the Internet. If you cannot connect to the Internet even if you have followed the procedures of your Internet service provider,
please contact a Samsung Electronics at 1-800-SAMSUNG.
● Select a network
• Access Point: You can select the IP sharer to use when using a wireless network.
If a wireless Access Point is not in the Access Point list, press the Red button.
N
When the connection is made, you will be returned to the screen automatically.
N
If you have selected an Access Point with a security authentication:
N
The Security Key input screen appears. Enter the security key and press the
Blue button on the remote control.
If security encryption type is WEP, 0~9, A~F will be available when you input
N
security key.
Connecting WPS (Wi-Fi Protected Setup)
● If Security Key is already set: In access point list, select WPS.
You can select PBC, PIN, Security Key.
N
•
Connecting by using PBC: Select a PBC (Push Button Configuration). Press the PBC
button on the AP (access point) within 2 minutes, and wait for connection.
• Connecting by using PIN: Select a PIN (Personal Identification Number).
The message showing the PIN Code is displayed. Input the PIN Code at AP
N
device within 2 minutes. Select OK and wait for connection.
Try again if connecting operation doesn't work
N
When the connection is not established although tried again, reset the access point. Please refer to a manual of each
N
access point.
•
Connecting by using Security Key: When selecting Security Key, the input window is
displayed. Input the security key and press Blue button.
Try again if connecting operation doesn't work.
N
● If Security Key is not set: When the security setting of AP that supports WPS is NONE,
you can select PBC, PIN, None Security. None Security is capable of connecting to AP
directly without using WPS function.
Process of PBC, PIN is same as above. Refer to if Security Key is already set.
N
Try again if connecting operation doesn't work.
N
English - 4
Wireless Network Setup
Security Key
Number
A B C D E F
Delete
Done
n Move `~9 Number E Enter R Return
Wireless Network Setup
Select a network 3/9
sson
PBC
jee
PIN
AP_1
Search
Security Key
Ap_2
Ad-hoc
U Move E Enter R Return
Press the PBC button on the access point.
Access Point Name : AP_1
Cancel
Press OK After input TV's Pincode in the access
point's setup.
Access Point Name : AP_1
PIN Code : 12345678
OK Cancel
Wireless Network Setup
Security Key
Number
A B C D E F G
Lowercase
H I J K L M N
Delete
O P Q R S T U
Done
V W X Y Z
n Move `~9 Number E Enter R Return
Wireless Network Setup
Select a network 3/9
sson
PBC
jee
PIN
AP_1
Search
None Security
Ap_2
Ad-hoc
U Move E Enter R Return