Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Stopping the appliance
Set each control knob (n°2 and 3 on picture) on 0, the pilot light turns off, the
appliance is no longer functioning.
Let the device cool
Disconnect the power cable.
Clean the appliance. (see 6. Cleaning)
d) Breakdown / repair:
In case of breakdown or of damaged part, please call your after-sales service and
confide any technical operation to qualified person.
When you contact the after-sales service of your distributor or your store, give him
the complete reference of your device (commercial name, type and serial number).
This information appears on the visible descriptive plate behind the device.
6. CLEANING AND MAINTENANCE
Disconnect the device.
- Let cool completely the device before any technical intervention or cleaning.
- Clean regularly the external walls of your device with warm water and wash liquid:
avoid the abrasive towelling. Rinse your device with a wet sponge. Dry it with a soft
cloth.
- Every evening, clean the plastic stopper in hot water to avoid obstructing it.
- Never clean the device under a water jet, the infiltrations would risk to damage it in
a irreparable way.
- Never immerse the device, the cord or the plug in the water or quite other liquid to
avoid any electric shock.
- During a prolonged non-use, we recommend you strongly to keep the device
shielded from the humidity.
7. TECHNICAL SPECIFICATIONS
Models
Outside dimensions
Weight
Power
No heating element
Current
Voltage
SINGLE WARM IT
240x215x230 mm
2 Kg
170 W
1
0.8 A
220-240 V ~
DOUBLE WARM IT
330x215x230 mm
3 Kg
2 x 170 W
2
1.6 A
220-240 V
15
Publicité
Table des Matières
