Cleaning And Maintenance; Technical Specifications - Roller Grill BM23 Notice D'installation Et D'utilisation

Temperature setting
Select the temperature by positioning the thermostat control knob (n°2 on picture)
on the wished temperature.
Attention : if the temperature is too high, water is going to evaporate quickly.
Think to cover the whole tank with containers or lids to limit evaporation of water.
Stopping the device
Set the thermostat control knob (n°2 on picture) on 0.
Let the device cool.
Disconnect the device.
Clean it (See 6. Cleaning)
d) Breakdown / repair:
In case of breakdown or of damaged part, please call your after-sales service and
confide any technical operation to qualified person.
When you contact the after-sales service of your Distributor or your store, give him the
complete reference of your device (commercial, typical name and serial number). This
information appears on the visible descriptive plate behind the device.

6. CLEANING AND MAINTENANCE

Disconnect the device.
- Let cool completely the device before any technical intervention or cleaning.
- Clean regularly the external walls of your device with of warm water and wash liquid:
avoid the abrasive towelling. Rinse your device with a wet sponge.
- Never clean the device under a water jet, the infiltrations would risk to damage it in a
irreparable way.
- Never immerse the device, the cordon or the plug in the water or quite other liquid to
avoid any electric shock.
- Regularly change the water to avoid any scale deposit
- Never use abrasive product or vinegar; it could damage the container in irremediable
way.
- During a prolonged non-use, we recommend you strongly to keep the device shield-
ed from the humidity.

7. TECHNICAL SPECIFICATIONS

Model
Outside dimensions mm
Weight
Power
No element
Current
Voltage
BM 23
360x360x265
8 Kg 500
1750 W
1
7.6 A
220-240 V ~
14