Product Description And Specifications; Intended Use; Product Features; Technical Data - Bosch GNH 18V-64 Professional Notice Originale

18 | English
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.

Intended Use

The power tool is intended for connecting work in roofing,
encasing and battening, as well as manufacturing wall and
ceiling elements, wood facades, pallets, wood fences, noise-
reduction walls and boxes.
Only the fasteners (nails, staples, etc.) specified in the
"Technical Data" table may be used.
Note: The power tool is not suitable for driving nails into
metal or concrete.
GNH 18V-64 M: Please do not use the power tool in contact
actuation mode with automatic return while working on scaf-
folding, ladders or other platforms and when a change of
working position is required. In this case, only use the single
actuation mode with backup sequence.

Product Features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Workpiece protector

Technical Data

Cordless nailer
Article number
Rated voltage
Actuation systems
– Single actuation with safety run
– Contact actuation with automatic return
Fastener
– Type
– Length
– Diameter
– Angle
Max. magazine capacity
Dimensions (without battery)
– Height
– Width
– Length with workpiece protector
Weight according to
A)
EPTA-Procedure 01:2014
Recommended ambient temperature during
charging
1 609 92A 5TX | (10.05.2021)
(2) Discharge lock-off
(3) Clamping lever for opening/closing the shot duct
(4) Thumbwheel for depth stop adjustment
(5) Trigger
(6) Battery release button
(7) Rechargeable battery
(8) Handle (insulated gripping surface)
(9) User interface
(10) Storage for workpiece protector
(11) Belt hook
(12) Magazine
(13) Magazine slider
(14) Nail pusher
(15) Outlet
a)
(16) Nail strip
(17) Magazine spring
(18) On/off switch button (user interface)
(19) On/off switch status (user interface)
(20) Single actuation display (user interface)
(GNH 18V-64 M)
(21) Contact actuation display (user interface)
(GNH 18V-64 M)
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
GNH 18V-64
3 601 D81 1..
V= 18
●
–
Brads
mm 32–64
mm 1.6
20°
105
mm 282
mm 97
mm 337
kg 3.3−4.3
°C 0 to +35
GNH 18V-64 M
3 601 D81 0..
18
●
●
Brads
32–64
1.6
20°
105
282
97
337
3.3−4.3
0 to +35
Bosch Power Tools