shark Rotator Lift-Away PowerFins ZD400 Serie Guide De L'utilisateur page 3

ASSEMBLY ASSEMBLY
4
(Click)
Cord Holder
5
(Click)
3 Upper Cord
(Click) Hook
1
(Click)
6
(Click)
2
(Click)
Tool Storage
Posts
1. Insert Double Accessory Holder into the side of Pod above the Lift-Away Button.
2. Place pod onto Floor Nozzle Post.
3. Insert Wand into pod.
4. Insert Handle into wand.
5. Attach Hose Clip to wand.
6. Connect Hose to back of pod.
IMPORTANT: For proper operation, ensure all parts are firmly clicked into place.
s h a r kc l e a n . c o m s h a r kc l e a n . c o m