Sunred GS17K Manuel page 5

Assembly
The heater can be put together by one person, but is recommended to do this with two people.
Step 1: Connect the Bottom Tube to the Base by screwing them together.
Step 2: Feed the Power Cord through the Base and the Bottom Tube, and pull through around 2m of cable.
Step 3: Connect the Middle Tube with the Bottom Tube by screwing them together.
Step 4: Connect the Top Tube with the Middle Tube by screwing them together.
Step 5: Place the power cord plug through base, Bottom Tube, Middle Tube and Top Tube. Connect the power cord plug
to the socket in the heater head.
www.sunred.nl