ensto ECO16LCD Notice D'installation page 16

Moving from one menu to another is done by pushing the arrow buttons and the desired menu
is chosen by pushing the OK button. In the setting mode the symbol of the chosen menu is
displayed.
The thermostat will return into the basic mode 60 seconds after a button has been pushed. In
this case the unconfi rmed choices will not be saved.
SETTING THE DAY OF WEEK AND CLOCK
The day of week and clock are entered in the
• Enter the day of week by pushing the arrow buttons and confi rm the setting by pushing
the OK button (1=Monday, 2=Tuesday, 3=Wednesday etc)
• Enter the time by pushing the arrow buttons and confi rm the setting by pushing the OK
button.
SETTING THE WEEKCLOCK
The weekclock settings are entered in the
• Enter the starting time for the period 1C with 15 minutes accuracy by pushing the arrow
buttons and confi rm the setting by pushing the OK button.
• Enter the desired temperature value for the period 1C with 0.5°C accuracy by pushing the
arrow buttons and confi rm the setting by pushing the OK button.
• Repeat the instructions above to enter the starting times and temperatures for the periods
2E...6E.
NOTE! The weekclock sets the desired values for a certain period of time. While using the
weekclock it should be taken into consideration that it may take several hours to warm up the
fl oor construction into the desired temperature. That is why the temperature rising and drop-
ping times should be predicted when setting the weekclock periods.
SETTING THE EXTERNAL TEMPERATURE CHANGE
The temperature value of the external temperature change is entered in the
• Enter the desired temperature by pushing the arrow buttons and confi rm the setting by
pushing the OK button.
SETTING THE METHOD OF TEMPERATURE CONTROL
The thermostat can control the temperature in four alternate methods. The desired method
is entered in the menu.
ROOM THERMOSTAT (A)
The temperature is controlled according to the room temperature.
• Choose the setting value A by pushing the arrow buttons and confi rm the setting by push-
ing the OK button.
FLOOR THERMOSTAT (F)
The temperature is controlled according to the fl oor temperature. The method is available only
if the fl oor sensor is connected to the thermostat.
16
menu
menu.
menu.