Assembly; The Use - Montiss STEAM MOP BREEZE Mode D'emploi

ASSEMBLY

Remove the water tank
from the device.
Place the main unit with the
tube into the foot.

THE USE

Filling the water tank
Take care: never fill the water tank any further than the maximum quantity. The maximum
quantity amounts 500 ml.
1.
Ensure yourself that the device has been disconnected from the power supply.
2. Remove the water tank from the main unit.
3. Turn the top of the water tank counter clockwise to open it.
4. Fill the water tank under the sink or by using the measuring jug, with 500 ml water.
Take care: Never add descaler, alcohol, perfume or cleansing agents to the water in the tank
- this may be harmful for the device and/or your safety.
5. Place the top back onto the water tank and turn it clockwise to fasten.
6. Place the water tank back onto the main unit.
Filling the dispenser
1. Ensure yourself that the device has been disconnected from the power supply.
2. Remove the dispenser from the main unit.
3. Turn the top of the dispenser counter clockwise to open it.
4. Fill the dispenser with liquid cleansing agent.
5. Place the top back onto the dispenser and turn it clockwise to fasten.
6. Place the dispenser back onto the main unit.
Place the tube in the main
unit.
Attach the foot with the
remaining small screw.
Attach the tube to the main unit
with the largest screw supplied.
19