Thermostat Mode; Internal Thermostat; Operating Parameters; Stove Parameters - CASATELLI FILIPPO 10 Généralités - Avertissements - Installation - Entretien

Select the mode using the PROG+ key and set
ON with the TEMP+ and TEMP- keys.
Select the programme type using the PROG+ key
and set Enab. with the TEMP+ and TEMP- keys.
Press SET to save the data and insert a new
ignition programme. If programming is complete,
press STOP to exit.
Remember to set the operating mode to Automatic
to enable control of the weekly programmer.

9.14 THERMOSTAT MODE

THERMOSTAT MODE
Press SET to open and modify the operating mode
for temperature control or automated ignition and
power off .

9.15 INTERNAL THERMOSTAT

Operating mode that regulates stove operation
based on the detected ambient temperature. The
stove is ignited both manually and automatically
by the settings of the incorporated weekly
programmer or internal timer. The stove power
is automatically controlled based on the set
temperature, optimising heating with signifi cant
pellet savings.

9.16 OPERATING PARAMETERS

STOVE PARAMETERS

Press SET to open and modify the main stove
parameters such as pellet load, fl ue gas extraction
speed, ambient air fan and ambient temperature
correction. Using the TEMP+ and TEMP- keys it is
possible to change the stove setting percentages
to correct its operation based on the pellets
used. Then press SET to confi rm the modifi ed
parameter and save it in the memory. Use the
PROG+ and PROG- keys to scroll the parameters.
Press the STOP key to exit the menu.
If the stove is in "Pellet Tuning" automatic mode,
the user will not be able to modify the pellet load
and fl ue gas extraction speed because this is
automatically managed by the printed circuit
board.

9.17 PELLET LOADING

Allows all loading parameters to be increased or
decreased in percentage from -50 to +50%.

9.18 FLUE GAS EXTRACTION

Allows all fl ue gas extraction parameters to be
increased or decreased in percentage from -50 to
+50%.

9.19 ROOM FAN

Allows all air ventilation parameters to be increased
or decreased in percentage from -50 to +50%.

9.20 RECENT ERRORS LOG.

The menu allows the most recent errors recorded
by the printed circuit board to be viewed, along
with the date and time of the event, as well as a
brief description.

9.21 LANGUAGE SELECTION

SEL. LANGUAGE
The menu allows the user to select the language
of the panel messages:
• Italian
• English
• French
• German
• Spanish
Using the PROG+ and PROG- keys it is possible
to scroll the various languages and select the
desired one.
08/2021 - EN
English
19 19