Gear Housing - Efco PTX 2710 Manuel D'utilisation Et D'entretien

MAINTENANCE
WARNING! – Mufflers fitted with catalytic converters
get very hot during use and remain so for some time
after stopping. This also applies at idle speed.
Contact can result in burns to the skin. Remember
the risk of fire!
CAUTION! - If the muffler is damaged, it must be
replaced. If the muffler frequently becomes blocked,
80
this could be an indication that the efficiency of the
catalytic converter is limited.
WARNING: Do not operate your pole pruner if the
muffler is damaged, missing or modified. An
improperly maintained muffler will increase the risk
of fire and hearing loss.

Gear Housing

Every 30 working hours, remove screw (A, Fig. 80) on the gear
housing and check the quantity of grease. Use high quality
molybdenum bisulfide grease.
Extra maintanance advisable
It is advisable to inspect the machine by a specialized technician
at an authorized service network at the end of season, if used
intensively, and every two years if with normal use.
ATTENTION: All maintenance operations not reported
in this manual must be carried out by an authorized
Service Center. To ensure steady and regular pole
pruner operation, remember that parts must only be
replaced with ORIGINAL SPARES.
Any unauthorized changes and/or use of non-original
replacement parts may result in serious injury or death to the
operator or third parties.
en
29