Chapter 1 - General Description; General Identification Data - TecniWork PODOSCOPIO AP500 Manuel D'instructions

Chapter 1 - GENERAL DESCRIPTION

This instruction handbook is considered as an essential document of podoscope AP 500. Therefore they must not
be separated in case of cessation to third parties, in accordante with EC Directive 93/42/EC and following norms.
This handbook gives the operator all the relevant information to carry out the following operations correctly:
- INSTALLATION
- USAGE
- MAINTENANCE
Instructions for a correct installation are contained in the par. 2.2 CONDITIONS FOR THE INSTALLATION.
FOLLOW THE INSTRUCTIONS FOR USE
READ CAREFULLY THIS MANUAL FOR THE INSTALLATION
THE USAGE AND THE MAINTENANCE OF THE PODOSCOPE
COMPANY NAME
COMMERCIAL TRADEMARK: TECNIWORK
TYPOLOGY: PODOSCOPE
MODEL: AP500
MANUFACTURER: TECNIWORK S.p.A. - Via R. Benini, 8 - 50013 Campi Bisenzio - FI - Italy
IDENTIFICATION AND LABELS - SYMBOLS EXPLICATION
WARNING: MAXIMUM LOAD 297 LBS
ON EACH DEVICE YOU WILL FIND A SIMILAR PLATE WITH THE MANUFACTURER'S IDENTIFICATION.
TECNIWORK S.p.A. - PODOSCOPE AP500
PodoManISTRUZ_A4_x.indd 14
1.1 GENERAL IDENTIFICATION DATA
- 14 - doc.cod.IS-05-2 Ed.23/11/16
05/01/17 13:10