Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
1. microphone
2. microphone LED
3. power LED
4. laser aperture
6. Use
• DIP Switch Setting
• DMX mode: DIP switch 10 must always be on. For the desired address see table below:
SW1 SW2 SW3 SW4 SW5 SW6 SW7 SW8 SW9 SW10 Function
X
X
X
X
• Sound-activated mode: When there is no DMX signal, and DIP switch 10 is on and DIP switch 9 is off, the unit will
go in sound-activated mode. Adjust the sensitivity using the knob on the back of the unit.
• Automatic mode: When there is no DMX signal, and DIP switch 9 and 10 are on, the unit will work in automatic
mode.
• Master/slave mode: Set one device as master device and all other connected devices as slave devices. All slave
units will work according to the master device.
• Detailed DMX Values Per Channel
Channel
1
2
3
RUNNING SPEED
4
TWINKLE SPEED
• DMX512 Connection
Connect the provided XLR cable to the female 3-pin XLR output of your controller and the other side to the male 3-
pin XLR input of the VDP1001GLD4. Multiple VDP1001GLD4s can be linked through serial linking. The linking cable
should be a two-core screened cable with XLR input and output connectors.
• DMX512 Chain with Termination
VDP1001GLD4
5. DIP switches
6. sensitivity knob
7. DMX input
8. DMX output
X
X
X
X
X
X
DMX setting
Function
From
0
64
MODE
128
192
0
RUNNING
64
DIRECTION
128
0
0
A DMX terminator is recommended for installations where the DMX cable has to run a
long distance or is in an electrically noisy environment (e.g. discos). The terminator
prevents corruption of the digital control signal by electrical noise. The DMX terminator is
simply an XLR plug with a 120 resistor between pins 2 and 3, which is then plugged into
the XLR output socket of the last device in the chain.
Please see illustrations.
X
X
X
X
X
X
To
Description
63
Blackout
127 Sound activation
191 Auto mode
255 DMX mode
63
Forwards rotation
127 Static
191 Backwards rotation
255 From fast to slow
255 From fast to slow
5
9. fan
10. power input and fuse
11. on/off switch
0
1
Sound activation
1
1
Auto mode
0
DMX/Slave
HQPOWER
Publicité
Table des Matières
