Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Connecting Handpiece
1. Slide handpiece onto coupler.
2. Press firmly until it snaps into place.
Note: Handpiece should swivel freely with slight tension and sit flush
on coupler.
Removing Handpiece
Brio 440 / Brio 440L: Pull back release ring on coupler and pull hand-
piece straight off.
Brio 440KL: Hold ring on coupler and pull handpiece straight off.
Note: Do not hold or pull on hose.
Brio 440F (Fig. 3)
Connecting Handpiece
1. Align tubes in handpiece with delivery system tubing.
2. Thread tubing nut to bottom of handpiece and finger tighten.
Removing Handpiece
Unthread tubing nut and pull handpiece straight off.
6 EN
Release Ring
Fig. 2
Fig. 3
Publicité
Table des Matières
