3.2 - CONNECTIONS AND PLACING INTO SERVICE
After the appliance has been positioned, connect the power cable by
inserting the plug into a mains socket outlet with overcurrent protection
devices.
4 - OPERATION AND USE
4.1 - OPERATION
The appliance should be placed on a work table in front of the operator, at
a convenient height to reduce fatigue and unnecessary effort.
Secure the appliance to the table by means of four M6 bolts inserted
through the holes in the baseplate and secured under the worktable by
means of nuts.
Before setting the appliance into operation:
a) connect the water supply hose to the threaded connector (1, Fig. 1)
located on the rear of the appliance - TRIM-1 models only;
b) the residual water drain hose on the relevant connector (2, Fig. 1) -
TRIM-1 models only -
decanting tank; or
c) a suitable suction system (we recommend the AIR-BOX DE GIORGI
system) on the relevant connection (2, Fig. 1) - TRIM ECO DISK
models only;
The appliance is set into operation by pressing pushbutton "I" (5, Fig. 2).
Remember to switch the appliance OFF after use by pressing
pushbutton "O" (6, Fig. 2).
GB - 6
inserting the other end of the hose into a
2
DENTAL MODEL TRIMMER
3
4
1
Fig. 1
Carlo de Giorgi